Recent Results From the EU POF-PLUS Project: Multi-Gigabit Transmission Over 1 mm Core Diameter Plastic Optical Fibers

Recent activity to achieve multi-gigabit transmission over 1 mm core diameter graded-index and step-index plastic optical fibers for distances up to 50 meters is reported in this paper. By employing a simple intensity-modulated direct-detection system with pulse amplitude or digital multi-tone modulation techniques, low-cost transceivers and easy to install large-core POFs, it is demonstrated that multi-gigabit transmission up to 10 Gbit/s over 1-mm core diameter POF infrastructure is feasible. The results presented in this paper were obtained in the EU FP7 POF-PLUS project, which focused on applications in different scenarios, such as in next-generation in-building residential networks and in datacom applications

Acromioplasty during repair of rotator cuff tears removes only half of the impinging acromial bone.

To date, there is no consensus on when and how to perform acromioplasty during rotator cuff repair (RCR). We aimed to determine the volume of impinging bone removed during acromioplasty and whether it influences postoperative range of motion (ROM) and clinical scores after RCR. Preoperative and postoperative computed tomography scans of 57 shoulders that underwent RCR were used to reconstruct scapula models to simulate volumes of impinging acromial bone preoperatively and then compare them to the volumes of bone resected postoperatively to calculate the proportions of desired (ideal) vs. unnecessary (excess) resections. All patients were evaluated preoperatively and at 6 months to assess ROM and functional scores. The volume of impinging bone identified was 3.5 ± 2.3 cm <sup>3</sup> , of which 1.6 ± 1.2 cm <sup>3</sup> (50% ± 27%) was removed during acromioplasty. The volume of impinging bone identified was not correlated with preoperative critical shoulder angle (r = 0.025, P = .853), nor with glenoid inclination (r = -0.024, P = .857). The volume of bone removed was 3.7 ± 2.2 cm <sup>3</sup> , of which 2.1 ± 1.6 cm <sup>3</sup> (53% ± 24%) were unnecessary resections. Multivariable analyses revealed that more extensive removal of impinging bone significantly improved internal rotation with the arm at 90° of abduction (beta, 27.5, P = .048) but did not affect other shoulder movements or clinical scores. Acromioplasty removed only 50% of the estimated volume of impinging acromial bone. More extensive removal of impinging bone significantly improved internal rotation with the arm at 90° of abduction

Benthic oxygen exchange over a heterogeneous Zostera noltei meadow in a temperate coastal ecosystem

Seagrass meadows support intense but highly variable benthic metabolic rates that still need to be better evaluated to determine an accurate trophic status. The present study assessed how seagrasses and associated benthic macrofauna control spatiotemporal changes in benthic oxygen exchanges within a temperate bay. Based on seasonal sampling over a complete year cycle, the diffusive oxygen uptake (DOU), community respiration (CR) and gross primary production (GPP) were measured in a Zostera noltei meadow within Arcachon Bay, taking into account its spatial heterogeneity. Oxygen fluxes were assessed in sediment cores, within which benthic macrofauna and seagrass abundances and biomasses were quantified. The presence of Z. noltei did not significantly affect the DOU. Seasonal changes in CR and GPP correlated strongly with temperature in the presence of Z. noltei. The characteristics of benthic macrofauna associated with Z. noltei only weakly affected seasonal changes in CR. High spatial changes in both GPP and CR were mainly driven by the aboveground biomass of Z. noltei. When extrapolated to the whole intertidal area of the bay, in spite of limitations, our results suggest (1) overall higher contributions to CR and GPP from the seagrass meadow than from bare sediments, even though alternative primary producers in bare sediments (likely microphytobenthos) contributed significantly during winter; (2) an annual decrease in CR and GPP of 35 and 41%, respectively, resulting from the decline in Z. noltei of 25% between 2005 and 2007; and (3) a strong seasonality in the magnitude of this decrease, which was high during autumn and low during winter.

Design of the strut braced wing aircraft in the agile collaborative MDO framework

The paper describes the deployment of the AGILE Development Framework to investigate the Strut Braced Wing aircraft configuration. The design process consists of a multilevel multidisciplinary architecture, progressing from the initial conceptual synthesis to the physics based analysis. All the main disciplinary domains, including on board system design and cost assessment, are accounted for in the assembled workflow. Due to the specific characteristics of the Strut Braced Wing configuration, the aeroelastic analysis is the main focus of the study and it is addressed at both high and low fidelity levels. The integration of the engine-wing system is also included in the design process. All the design competences, which are hosted at the different partners, communicate via CPACS (Common Parametric Aircraft Configuration Schema) data schema. All the results generated, including the multidisciplinary design process itself, will be published and made available as part of the AGILE Overall Aircraft Design database

Relationship between casting modulus and grain size in cast A356 aluminium alloys

Microstructure of Al-Si alloy castings depends most generally on melt preparation and on the cooling rate imposed by the thermal modulus of the component. In the case of Al-Si alloys, emphasis is put during melt preparation on refinement of pro-eutectic (Al) grains and on modification of the Al-Si eutectic. Thermal analysis has been used since long to check melt preparation before casting, i.e. by analysis of the cooling curve during solidification of a sample cast in an instrumented cup. The conclusions drawn from such analysis are however valid for the particular cooling conditions of the cups. It thus appeared of interest to investigate how these conclusions could extrapolate to predict microstructure in complicated cast parts showing local changes in the solidification conditions. For that purpose, thermal analysis cups and instrumented sand and die castings with different thermal moduli and thus cooling rates have been made, and the whole set of cooling curves thus recorded has been analysed. A statistical analysis of the characteristic features of the cooling curves related to grain refinement in sand and die castings allowed determining the most significant parameters and expressing the cube of grain size as a polynomial of these parameters. After introduction of a further parameter quantifying melt refining an excellent correlation, with a R2 factor of 0.99 was obtained

System aspects of the FDMA PON conceived within the FABULOUS European project (Invited)

International audienc

A look into the future of in-building networks: roadmapping the fiber invasion

Optical fiber-based in-building network solutions can outperform in the near future copper- and radiobased solutions both regarding performance and costs. POF solutions are maturing, and can already today be cheaper than Cat-5e solutions when ducts are shared with electricity cabling. Advanced signal modulation techniques allow high-capacity services over POF. With their extra features of multi-wavelength transport and routing, fiber solutions offer a higher network throughput and flexibility, and improved sustainability

Chartis Measurement of Collateral Ventilation:Conscious Sedation versus General Anesthesia

BACKGROUND: Absence of interlobar collateral ventilation using the Chartis measurement is the key predictor for successful endobronchial valve treatment in severe emphysema. Chartis was originally validated in spontaneous breathing patients under conscious sedation (CS); however, this can be challenging due to cough, mucus secretion, mucosal swelling, and bronchoconstriction. Performing Chartis under general anesthesia (GA) avoids these problems and may result in an easier procedure with a higher success rate. However, using Chartis under GA with positive pressure ventilation has not been validated. OBJECTIVES: In this study we investigated the impact of anesthesia technique, CS versus GA, on the feasibility and outcomes of Chartis measurement. METHODS: We retrospectively analyzed all Chartis measurements performed at our hospital from October 2010 until December 2017. RESULTS: We analyzed 250 emphysema patients (median forced expiratory volume in 1 s 26%, range 12-52% predicted). In 121 patients (48%) the measurement was performed using CS, in 124 (50%) using GA, and in 5 (2%) both anesthesia techniques were used. In total, 746 Chartis readings were analyzed (432 CS, 277 GA, and 37 combination). Testing under CS took significantly longer than GA (median 19 min [range 5-65] vs. 11 min [3-35], p < 0.001) and required more measurements (3 [1-13] vs. 2 [1-6], p < 0.001). There was no significant difference in target lobe volume reduction after treatment (-1,123 mL [-3,604 to 332] in CS vs. -1,251 mL [-3,333 to -1] in GA, p = 0.35). CONCLUSIONS: In conclusion, Chartis measurement under CS took significantly longer and required more measurements than under GA, without a difference in treatment outcome. We recommend a prospective trial comparing both techniques within the same patients to validate this approach

Biodiversity conservation, ecosystem services and organic viticulture: A glass half-full

Organic farming is a promising but still debated option to ensure sustainable agriculture. However, whether organic farming fosters synergies or mitigates tradeoffs between biodiversity, ecosystem services and crop production has rarely been quantified. Here, we investigate relationships between multitrophic diversity (14 taxa above and belowground), yield, natural pest control and soil quality (14 proxies of ecosystem services) in organic and conventional vineyards along a landscape gradient. Organic farming enhanced biodiversity and pest control, but decreased wine production. Compared to conventional systems, multitrophic diversity was 15 % higher, and pest control services were 9 % higher in organic systems, while wine production was 11 % lower. Regardless of management type, we found a strong tradeoff between wine production and pest control, but not between wine production and biodiversity. The landscape context was not a strong moderator of organic farming effects across taxa groups and ecosystem services, but affected specific taxa and ecosystem services, especially natural pest control. Our study reveals that wine production and biodiversity conservation do not necessarily exclude each other, which implies the existence of a safe operating space where biodiversity and wine production can be combined. We conclude that organic farming can contribute to improve the sustainability of viticulture, but needs to be complemented by management options at the local and landscape scales in order to fully balance biodiversity conservation with the simultaneous provision of multiple ecosystem services.This research was funded by the research project SECBIVIT, which was funded through the 2017–2018 Belmont Forum and BiodivERsA joint call for research proposals, under the BiodivScen ERA-Net COFUND program, with the funding organizations: Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación/Spain, grant PCI2018-092938; MCIN/AEI/10.13039/501100011033); Austrian Science Fund (FWF) (grant number I 4025-B32); Federal Ministry of Education and Research (BMBF/Germany) (grant number 031A349I); French National Research Agency (ANR); Netherlands Organization for Scientific Research (NWO); National Science Foundation (grant #1850943); and Romanian Executive Agency for Higher Education, Research, Development, and Innovation Funding (UEFISCDI). The authors also acknowledge the support of the ECOPHYTO 2+ Plan under the grant X4IN33VI (OPERA project) as well as the support the French National Research Agency (ANR) under the grant 20-PCPA-0010 (PPR Vitae, Cultivating the grapevine without pesticides: towards agroecological wine-producing socio-ecosystems). We thank Evelyne Thys and Hugo Hernandez for their help in field sampling, Lionel Delbac for the Lobesia botrana rearing, Alexis Saintilan for identifying pollinators, and Edith Gruber for identifying earthworms